Printing the edition ‘Marigold’ Multi-block Linocut 2015

Just thought I’d share with you some photographs of the process of printing the edition ‘Marigold’ linocut.

As it was a multi-block print I needed a way to register the blocks against the paper. I used a sheet of acetate marked up on the reverse with marker pen, showing the bottom right corner of where the lino block should be placed and where the bottom right corner of the paper should be placed. Acetate can be wiped easily of any ink that may stray onto it.

When printing I used bits of scrap paper to place on any areas of the lino that had accidently picked up ink that I didn’t want to print (I wanted a clean white paper background).

I used water based inks: Caligo Safewash Relief and Schmincke Aqua Linoldruck ink.

I printed using a hand-press onto dry Zerkall Hand-Made Printing Paper 210gsm.

(© Catherine Cronin)

Advertisements

Exhibition – British Museum: Shifting patterns Pacific barkcloth clothing – till 06 Dec 2015

I saw a fabulous exhibition this week at the British Museum – Shifting Patterns Pacific barkcloth clothing, free entry and on until 06 Dec 2015. I highly recommend it. I was interested in the patterned designs and how they were made on the barkcloth – although the making of the barkcloth itself is also fascinating and a laborious process.

Patterns are made by; embossing using carved beaters; printing using carved stamps; rubbing pigments on the cloth once it is placed over a patterned tablet to bring out the design; direct painting onto the cloth and using stencils; and dyeing the cloth.

The barkcloth is used to make garments, headdresses, masks, and body adornments. The designs and patterns are specific to different peoples and have different meanings. Women generally make and decorate the cloth; but depending on the area women may not be allowed to make cloth for rituals, only the men can do this.

Here are some photos of my favourite objects from the exhibition, apologies for the quality but they were taken on a phone in low lighting where flash was not permitted. They are much better seen by the eye! So do go and take a look.

 

 

 

headdressweb2

(Objects belong to the British Museum)

 

Photography into Etching – Hand Colouring

I have finished a 3 day course on photo etching at City Lit taken over 3 weekends.

You can read about it here.

A couple of the prints with chine-collé weren’t working well, so I added some hand inking to see if I could get a more harmonious image. Have a look at the before and after photographs below.

AlhambraCourtyardBlueOrangehalf

Before:
Alhambra Courtyard Blue; Orange Chine-collé

AlhambraCourtyardBlueOrangehalfinked

After:
Alhambra Courtyard Blue; Orange Chine-collé
Orange & Green Ink Hand Colouring

AlhambraCourtyardRedOrange

Before:
Alhambra Courtyard Red; Orange Chine-collé

AlhambraCourtyardRedOrangeInked

After:
Alhambra Courtyard Blue; Orange Chine-collé
Blue, Orange & Green Ink Hand Colouring

(© Catherine Cronin)

What Do Artists Do All Day? Norman Ackroyd

There is a great little series on the BBC called ‘What Do Artists Do All Day?’; and there is a terrific one on Norman Ackroyd; a fascinating insight into his life and printmaking process.

If you are in the UK with access to BBC iPlayer, you have three days left to watch the 30min episode on Ackroyd:

http://www.bbc.co.uk/iplayer/episode/b01rd35q/What_Do_Artists_Do_All_Day_Norman_Ackroyd/

For everyone, the BBC web page for the series does include some clips from the episode:

http://www.bbc.co.uk/programmes/b01rjr1d/episodes/guide

Photography into Etching Day 3

I have finished a 3 day course on photo etching at City Lit taken over 3 weekends.

It was a fantastic course; a great group to work within and an excellent teacher Anne-Marie Foster.

On Day 1 we were introduced to the principles of photo etching; the three different techniques to get source material onto transparent acetate in readiness to expose to a prepared photopolymer plate. We produced a test plate and printed it to understand the process and how to get tones to print successfully. You can read about Day 1 here.

On Day 2 I prepared one of my own artworks in Photoshop for tonal photo etching; and printed test plates. You can read about Day 2 here.

Photo into Etching Day 3: The Final Prints

AlhambraFinalPlateweb

Alhambra Courtyard Final Plate

On Day 3 I wanted to try different ink colours, different paper, chine-collé, and maybe colour rolls. I didn’t have enough time to get to try all I wanted. Below are the various experiments and results. I intend to work further on some of the prints with inks; so more to come on that.

AlhambraCourtyardRed

Alhambra Courtyard Red

AlhambraCourtyardRedYellow

Alhambra Courtyard Red; Yellow Chine-collé

AlhambraCourtyardRedOrange

Alhambra Courtyard Red; Orange Chine-collé

AlhambraCourtyardRedSkyBush

Alhambra Courtyard Red; Blue & Green Chine-collé

AlhambraCourtyardBlue

Alhambra Courtyard Blue

AlhambraCourtyardBlueOrange

Alhambra Courtyard Blue; Orange Chine-collé

AlhambraCourtyardBlueOrangehalf

Alhambra Courtyard Blue; Orange Chine-collé

(© Catherine Cronin)

Photography into Etching Day 2

I am attending a 3 day course on photo etching at City Lit over 3 weekends.

On Day 1 we were introduced to the principles of photo etching; the three different techniques to get source material onto transparent acetate in readiness to expose to a prepared photopolymer plate. We produced a test plate and printed it to understand the process and how to get tones to print successfully. You can read about Day 1 here.

To photo-etch and print a tonal image successfully from my source photographs or original artwork, I have to introduce digitally texture, like ‘dots’ to the image (like a newspaper image is made up of dots), so that the image photo-exposes and acid etches these ‘dots’ as ‘pits’ to hold ink and so print a tonal image.

Photo into Etching Day 2: Source Image

First of all I wanted to find a really good tonal image so that I could fully get to grips with the Photoshop techniques required for adding texture to the different areas of tone. I found a tonal colour image that worked well in grayscale, but I felt it was a little boring, so I combined it with a line drawing I made of the same subject. Combined in Photoshop using ‘clone stamp’ tool, and ‘multiply’ option on new layers.

Alhambra Courtyard Colour

Alhambra Courtyard Graysacle © Catherine Cronin

Alhambra Courtyard Grayscale

Black pen sketch of Alhambra inner courtyard.

Alhambra Courtyard Line Drawing

Alhambra Courtyard Grayscale & Line Drawing Combined

Adding Texture to Tones in Source Image

The next step was to separate onto different layers the dark tones, midtones, light tones and white areas of my source image. Using the ‘magic wand’ tool I could make these specific selections of tonal values and copy to a new layer. To add texture to the tonal areas we would simply be applying the filter ‘noise’ to each tonal layer; the darker tones would require a higher value of ‘noise’ than the lighter tones. As I wanted areas to remain as white paper, I did not apply the ‘noise’ filter to my ‘white areas’ layer. See below for a close up of a section of my image for before and after ‘noise’ filter is added. It is a bit difficult to see the ‘texture’ below; in Photoshop when you view ‘actual pixels’ you can really see a difference.

Alhambra Courtyard Detail

Alhambra Courtyard Detail
AlhambraCourtyardnoisedetail

Alhambra Courtyard Detail With ‘Noise’ Filter

Once I was happy with my filter application I printed out the source image onto acetate and printed a test plate to see how the tones would print.

Alhambra Courtyard Acetate Test 1

AlhambraCourtyardTestPlate1web

Alhambra Courtyard Test Plate 1

It is hard to see in the images below but after my first print I felt I could add more ‘noise’ to the darker tones in my image and lessen the amount of ‘noise’ on the midtones i.e to make dark areas darker and midtones area lighter.

AlhambraTest1web

Alhambra Courtyard Test Print 1

I adjusted my image; printed onto acetate and printed a second test plate; which I think printed better than the first – though admittedly hard to see the difference on here.

AlhambraTest2web

Alhambra Courtyard Test Print 2

Anyway I managed to prepare a final printing plate from the 2nd acetate I prepared, so Day 3 will be spent in final proofing of the image; trying different ink colours, trying different paper, trying areas of chine-collé, and maybe trying colour rolls.

AlhambraFinalPlateweb

Alhambra Courtyard Final Plate

AlhambraFinalPlateCUweb

Alhambra Courtyard Final Plate Detail

(© Catherine Cronin)

Photography into Etching Day 1

I am attending a 3 day course on photo etching at City Lit over 3 weekends. Last weekend we were introduced to the principles of photo etching and the three different techniques to get source material onto transparent acetate in readiness to expose to a prepared photopolymer plate. I am interested in using photo etching to print drawn images.

A Little On Traditional Etching & Aquatint

In traditional etching a metal plate after being worked on with resists and acid will have grooves and furrows that the ink sits in. When the plate is passed through a printing press the paper is forced by the pressure into the grooves and furrows picking up the ink. If the acid has eaten away a large area of the plate, this is referred to as an open bite. An open bite because of its large area will not hold ink, as the ink gets wiped away from the surface of the plate easily. To get a dark tone over a large area you need to create many ‘pits’ or ‘dots’ in this area for the ink to sit in – imagine the many dots in a newspaper image. To get these ‘pits’ a powdered resin is applied to the area, heated, and then the acid eats away around the hard powdered resin resist and introduces ‘pits’ for the ink to sit in. The powdered resin is called an ‘aquatint’.

Photo Etching Day 1

Photo etching is where through a photo-mechanical process you transfer a negative of the source image onto a photo receptive metal printing plate; and after processing can print from the plate a positive image. The source image must be grayscale and it is transferred onto transparent acetate. The acetate is laid on top of the photopolymer plate and exposed to light in a special unit. The light penetrates through the acetate where there is no image blocking its way to the photopolymer layer on the plate. When you remove the photopolymer plate from the light unit you wash it in ‘developer’ which removes the areas of the photopolymer layer where your image blocked the light, so your image is revealed as bare metal on the plate. The plate is then submerged in acid which etches, ‘eats’, away at the bare exposed metal, these areas will hold the ink for printing a positive image.

Source Images

The three ways you can prepare a source image for photo etching are:

1) A prepared digital image printed onto acetate.

2) A photocopy onto acetate direct from source image.

3) Drawing with indian ink directly onto True Grain.

It is important to understand that when you transfer an image photo-mechanically onto a metal printing plate that you will need to introduce ‘pits’ to your image where you require tone; so that your metal printing  plate will print the tonal values of your image.

Test Plate

To help us understand how to print tone through photo etching, our first task was to produce a test plate by photocopying onto acetate direct from a source image. The source images I used were an image cut from a newspaper, black pen drawing, and part of a photograph I had.

Photo-Etch-Test-Source-Image-web

Source Image

Photo-Etch-Test-Acetate-web

Photocopy On Acetate

PhotoEtchPlateInfoweb

Etched Photopolymer Test Plate

PhotoEtchTestPrintweb

Photo Etched Print

The newspaper image was made up of many tiny ink dots; after photo-exposure to the metal printing plate these dots were acid etched and became ‘pits’. These ‘pits’ held the ink and so a tonal image was printed. The tonal image is quite dark, this is because many dots made up the newspaper image creating a strong tone; in fact too much of a strong tone.

The black pen lines after photo-exposure to the metal printing plate, and after acid etching became ‘thin grooves’.  These thin grooves held the ink and so printed as a line.

The photograph is a tonal image, and a smooth image unlike the newspaper image which is made from dots. After photo-exposure to the metal printing plate, the dark areas of the photograph were acid etched. On the printing plate you can clearly see the image; BUT after printing this section printed as a messy blur. Why?

Well, the dark areas of the photograph were acid etched as an open area of plate – an open bite. You wipe an etched plate’s surface to remove excess ink from the surface but to leave ink in grooves and pits; if you are wiping an area that is ‘an open bite’ then the ink is easily removed, the ink does not sit neatly like it does in a groove.

As I wiped the surface of my plate I found all the ink was wiping out of the area where my ‘photograph’ was etched. So I under wiped trying to leave ink in that area. But the ink wasn’t sitting nicely in grooves or pits, it was just messily sitting on the surface which is why it printed as a mess.

To photo-etch and print a photograph successfully I would have had to introduce digitally ‘dots’ to the image (like the newspaper) so that the image photo-exposed and acid etched these ‘dots’ as ‘pits’ to hold ink and so print a tonal image.

Photo Etching Day 2 will be focused on using Photoshop to manipulate a tonal  image I want to print.

(© Catherine Cronin)